Who should use a 200-yard zero?

Hunters in open country where shots commonly run 150-300 yards. With many flat-shooting hunting loads, a 200-yard zero keeps the bullet within a few inches of the line of sight across that whole span, so a center hold works without dialing.

Can I set a 200-yard zero at a 100-yard range?

Yes — zero slightly high at 100. The classic figure for many hunting loads is around 1.5 to 2 inches high at 100, but the right number depends on your load and sight height; compute it for your setup, then confirm at real distance when you can.

What target should I print for 200 yards?

The bullseye or silhouette — at 200 you want a bold aim point you can quarter cleanly at magnification. Use the 1-inch grid at 100 to establish the offset, then confirm on the bold target at 200.

← zeroconsiderations.com

Sight-In Targets for 200 Yards — the Open-Country Zero

A 200-yard zero is the flat-country hunter's answer to "how do I not think about holdover." With many modern hunting loads, zeroed at 200 the bullet stays within a few inches of your line of sight from the muzzle out past 250 — which covers the vast majority of ethical hunting shots with a plain center hold. Here's how to set one up, including from a 100-yard range.

Free printable targets for the job

Bullseye — a bold ringed bull you can quarter cleanly in the scope at 200.
1-inch grid — for the 100-yard offset method below, where exact inches matter.
Silhouette — confirm on a full-size shape at distance.

Two ways to get there

The direct way: shoot it at 200

If your range has a 200-yard line, zero there directly. Groups open up and wind starts to vote, so shoot from a solid rest and let a measured group — not a called flyer — drive the correction. Photograph the target up close after the string; the measurement workflow is the same as at any distance.

The common way: offset at 100

Most people set a 200-yard zero from the 100-yard line by printing deliberately high. The much-quoted figure is around 1.5 to 2 inches high at 100 for classic flat-shooting hunting loads — real for many setups, wrong for plenty of others. Slower cartridges need more, and sight height moves the number too. The honest process: compute the 100-yard offset for your load and sight height (the app's solver does this), shoot to that offset on the 1-inch grid, and confirm at actual distance the first chance you get.

Know your maximum point-blank range. A 200-yard zero's real payoff is the span over which a center hold stays in the vitals. The app's point-blank-range tool computes that span for your load and a vital-zone size you choose — worth checking before you decide 200 is even the right zero for your cartridge.

The three-shot sight-in workflow

Print the target at 100% scale ("actual size" — never "fit to page"). Every sheet has a 1-inch calibration bar so you can check your printer with a ruler.
Shoot a 3-round group from a solid rest, aiming center.
Photograph the target with the Zero Considerations app. The coded corner markers set true scale and correct camera tilt, the bullet holes are found automatically, and the app converts your group's offset into the exact click count for your optic's click value.
Dial the correction, then shoot a confirmation group. A group is a sample — the confirmation group is what makes it a zero.

The other distances

For education and lawful sporting use. Figures here are rough and load-dependent — treat them as orientation, not dope. Always confirm your zero with live fire at your real distance before relying on it, and follow all firearm safety rules and your range's procedures.

Zero Considerations — photograph the target, get the measured group and the exact clicks to dial, then keep the DOPE. One-time $9.99 on both stores — no subscription, no account, works with no signal.

App Store — $9.99 once Google Play — $9.99 once What it does Free printable targets

On Android, Google Play gives you 48 hours to ask for a refund — try it on your next range trip and keep it only if it earns its spot in your range bag. Not ready today? Wishlist it on Google Play and Google will notify you if the price drops before opening day.